Pyroelectric mortise motion sensor Smart Stairway PIR-SR501-1
The pyroelectric motion sensor is designed for use with digital TTL receiving devices with a logical 1 when motion is detected. The sensor can be used with the Smart Stairway step lighting controller or security systems in which the sensor is powered by a voltage of 5 to 20 V DC with a logical TTL level of +3.3 V. The sensor is designed for installation in a mortise socket box with a diameter of 65 mm.
Smart Stairway US-SR042 mortise ultrasonic motion sensor
The ultrasonic motion sensor (ultrasonic rangefinder) is designed for use with digital receiving devices. The sensor can be used with the Smart Stairway SS26 step lighting controller. Application sensor for installation in a cut-in box with a diameter of 65 mm. The operation of the ultrasonic distance detector is based on the principle of vibrating the time of passage of the distance from the distance to the point of contact with the ultrasound. The sensor cannot ensure correct operation when violating sound-absorbing surfaces. The processing hour for one vimir is set to 400 ms. To ensure smooth operation, the principle of differential significance of the three successive adjustments is used.
Pass-through mortise switch (button without fixation) for the Smart Stairway staircase lighting controller.
Any push-button switches without fixation, such as bell buttons, etc., are suitable for use in the SmartStairway automatic stair lighting system. Current strength and power do not matter, since the control signal of the buttons is a logical unit with a level of 3.3 - 5V with a current of less than 0.04A. The only requirement for switches is a high-quality contact group that eliminates rattling. Our company uses switches from the French company Legrand to complete the stair lighting systems. Although you can choose any switch at your discretion.
See detailed specifications and descriptions of products from this category in our online store:
Single motion sensor PIR-SR501-1
Double motion sensor PIR-SR501-2
TTL photosensor
Push-button switch without fixation